ENGINEERING DESIGN

ENGINEERING DESIGN SERVICES

Performing duties and responsibilities of the Design Engineer as defined in the Construction Contract;
Performing Engineering Calculations based on the scope of works as detailed in the construction contract, inclusive of the following as may be required:
- Geotechnical and Foundation Design; Civil Design (Drainage);
- Structural Design;
- Highway and Pavement Design;
- Mechanical, Electrical and Plumbing Design (MEP); Lighting Design;
- Heating, Ventilation and Air Conditioning Design (HVAC).
Ensuring that all designs adhere to industry standards and design codes both locally and globally as prescribed;
Providing associated services inclusive of but not limited to feasibility reports, surveys and desktop studies;
Providing ongoing engineering design consultation services including but not limited to:
- liaising with architect for the seamless integration of structural members and associated building services;
- providing as-built drawings where required;
- providing associated cost breakdown inclusive of Bill of Quantities and Cost Estimates;
- Providing responses to RFIs where required.
Preparation of Structural Integrity Reports (where required): Providing structural investigation services inclusive of the review of contract documents, design drawings, method statements, RFIs and correspondences and providing recommendations on remedial actions where required.

Mechanical Engineering Services
1. HVAC Design & Engineering
  - Heating, ventilation, and air conditioning system design
  - Load calculations and equipment sizing
  - Energy efficiency and thermal comfort analysis
  - Ductwork and piping layout
  - HVAC controls and automation systems
2. Fire Protection Systems
  - Sprinkler system design and hydraulic calculations
  - Fire suppression systems (clean agent, foam, CO2, etc.)
  - Fire alarm and detection systems integration
  - Code compliance with local regulations
3. Mechanical Equipment Selection
  - Equipment specification and procurement support
  - Commissioning and performance testing
  - Maintenance planning

Electrical Engineering Services
1. Power Distribution
  - High and low voltage electrical systems
  - Main switchgear and substation layout
  - Panel board and circuit design
  - Generator and UPS systems
2. Lighting Design
  - Interior and exterior lighting layouts
  - Emergency and exit lighting systems
  - Daylighting analysis and energy-efficient lighting solutions
3. Low Current / ELV Systems
  - Fire alarm systems
  - CCTV and security systems
  - Access control, intercom, and PA systems
  - Structured cabling and data networks
4. Renewable Energy Integration
  - Solar PV system design and feasibility
  - Battery storage systems
  - Grid-tied and off-grid solutions

Plumbing Engineering Services
1. Water Supply & Distribution
  - Potable water system design
  - Hot water generation systems (solar, electric, heat pump)
  - Booster pump selection and design
2. Drainage & Waste Systems
  - Wastewater and sewage system design
  - Stormwater management and rainwater harvesting
  - Grease trap and septic tank sizing
3. Specialised Plumbing Systems
  - Medical gas systems (for hospitals)
  - Industrial process piping
  - Grey-water recycling systems

Integrated MEP Services
- Sustainability and Energy Modelling
- Construction Documentation & Specifications
- Tendering and Procurement Assistance
- On-site Supervision and Commissioning
- Maintenance Planning and Post-Occupancy Support